Hi All,

As above having a problem when deploying software to test machines - reading the data transfer log it pushes it down to client which when i am on i can see it however it comes up with

DTSJob {C062BD52-4356-4E88-999C-E540ADA80D1E} in state 'RetrievedData'. DataTransferService 13/03/2014 09:21:20 3656 (0x0E48)
DTSJob {C062BD52-4356-4E88-999C-E540ADA80D1E} successfully completed download. DataTransferService 13/03/2014 09:21:20 3656 (0x0E48)
Execute called for DTS job '{C062BD52-4356-4E88-999C-E540ADA80D1E}'.  Current state: 'RetrievedData'. DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
QUEUE: Active job count decremented, value = 2. DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
DTSJob {C062BD52-4356-4E88-999C-E540ADA80D1E} in state 'NotifiedComplete'. DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
DTS job {C062BD52-4356-4E88-999C-E540ADA80D1E} has completed:
 Status : SUCCESS
 Start time : 03/13/2014 09:20:57
 Completion time : 03/13/2014 09:21:20
 Elapsed time : 22 seconds DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
Deleting persisted data for DTS job '{C062BD52-4356-4E88-999C-E540ADA80D1E}'. DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
CBITSDownloadMonitor::~CBITSDownloadMonitor({C062BD52-4356-4E88-999C-E540ADA80D1E}) DataTransferService 13/03/2014 09:21:20 3656 (0x0E48)
In CDataTransferService::CancelJob DataTransferService 13/03/2014 09:21:20 1488 (0x05D0)
In CDataTransferService::CancelJob DataTransferService 13/03/2014 09:21:21 7532 (0x1D6C)
DTSJob {3E2C1A01-B72A-4282-AC30-FCC2534C8FFD} in state 'Cancelled'. DataTransferService 13/03/2014 09:21:21 7532 (0x1D6C)
DTS::SetCancel({3E2C1A01-B72A-4282-AC30-FCC2534C8FFD}) DataTransferService 13/03/2014 09:21:21 7532 (0x1D6C)
QUEUE: Active job count decremented, value = 1. DataTransferService 13/03/2014 09:21:21 7532 (0x1D6C)

After this goes through without running the software it deletes the folder and doesnt run.

Any ideas?

Within the last month or so, we've been experiencing issues distributing various packages to our DP's. There doesn't seem to be any rhyme or reason to it; it can be any combination of packages and DP's.

We've noticed that just before the Win32 error occurs, the following 4 lines usually precede the error:

UpdateStagedFile failed; 0x80070040

UpdateStagedFolderRdc failed; 0x80070040

UpdateStagedFolderRdc failed; 0x80070040

UpdateStagedFolderRdcW failed; 0x80070040

We've had an open ticket with MS for over a week now, but there hasn't been any progress. 

Any light you guys could shed on this would be greatly appreciated!

I am deploying it to a User collection and setting the Purpose to Available but that doesn't fix it.

Do anyone have any idea?

Creating "Package" not "Application"

Hi Team,

I have an automation script which publishes a package in SCCM. Package, program, collection, advertisement all are working fine. While dealing with multiple dependency packages, we took the choice of creating task sequences for all the dependency packages and advertise it.

Im able to create a task sequence thru script successfully, but im trying to figure out how to advertise the task sequence thru script. Even with SDK, im not finding any script examples to advertise a task sequence. Even google doesn't have any worthy search results for my issue.

Can someone help me out, how to advertise a task sequence? or divert me to the right area where such examples are available.

Vijay Murugappa

================

If you wouldn't be forgotten as soon as you are dead, either do something worth writing, or write something worth reading.

I have noticed a number of times that after I deploy an application or package to a collection, any devices that may get added to that collection seem not to pick up the deployment. Is this normal or do I need change a configuration somewhere to allow this to occur?

Hi there;

I'm facing a problem with one of the users in the company, i offer him an application through SCCM but it seems like he never receives the application no matter what. I've tried sending multiple applications to him and its all the same, tried cleaning the cache but still nothing happened. Any suggestions?

Hi,

My requirement is  to upgrade Outlook 2007 clients outlook 2010 clients via SCCM 2007 software distribution.

how can this requirement be achieved.

Pls guide.

I want to pass a variable back to a task sequence from a script.  This script is in a package, and could be run as an advert or from the TS.  If I try to enable Microsoft.SMS.TSEnvironment and I'm not in a TS, it will generate an error. 

Is there a way I can KNOW that I'm in a TS prior to doing so?

We have a distribution point that is getting the .pck file copied to it but it never successfully unpacks that file and load it onto the DP Share. When the unpacking gets to the very end it fails and then starts over again in a constant loop. Each time it does this the temp folder is automatically removed and it starts to unpack to a new temp folder.

This package is loading on the other DPs fine.

Some of the errors I've noticed are:

Cannot open file E:\SMS\inboxes\despoolr.box\receive\2bvptcsm.sni. Cause is 11         SMS_DESPOOLER           3/18/2014 12:32:29 AM       4480 (0x1180)

Cannot read E:\SMS\inboxes\despoolr.box\receive\2bvptcsm.sni, skip it            SMS_DESPOOLER           3/18/2014 12:32:29 AM        4480 (0x1180)

Encountered errors while verifying signatures for instruction (E:\SMS\inboxes\despoolr.box\receive\ds_1s9y2.nil) coming from site CSM, retry it later        SMS_DESPOOLER           3/26/2014 9:56:55 PM    7860 (0x1EB4)

-----------------------------------------

Begin to calculate signature on E:\SMS\inboxes\despoolr.box\receive\ds_jqt9e.pkg using hash algorithm ID 0x800C               SMS_DESPOOLER           3/26/2014 10:57:01 PM  7232 (0x1C40)

Cannot open the file to verify the signature, Win32 error = 2      SMS_DESPOOLER           3/26/2014 10:57:01 PM  7232 (0x1C40)

CPublicKeyLookup::CPublicKeyLookup("CSM")  SMS_DESPOOLER           3/26/2014 10:57:01 PM  7232 (0x1C40)

Encountered errors while verifying signatures for instruction (E:\SMS\inboxes\despoolr.box\receive\ds_jqt9e.nil) coming from site CSM, retry it later        SMS_DESPOOLER           3/26/2014 10:57:01 PM  7232 (0x1C40)

-----------------------------------------

NAL[2] - WARNING: the network connect account list is empty. SMS_DISTRIBUTION_MANAGER 3/27/2014 3:02:42 PM 4248 (0x1098)
NAL[2] - WARNING: TryEachInList() failed.  Unspecified error SMS_DISTRIBUTION_MANAGER 3/27/2014 3:02:42 PM 4248 (0x1098)
NAL[4] - Recoverable error: Unspecified error SMS_DISTRIBUTION_MANAGER 3/27/2014 3:02:42 PM 4248 (0x1098)

-----------------------------------------

Thanks,

Jason

Jason

Hi Team,

I have an automation script which publishes a package in SCCM. Package, program, collection, advertisement all are working fine. While dealing with multiple dependency packages, we took the choice of creating task sequences for all the dependency packages and advertise it.

Im able to create a task sequence thru script successfully, but im trying to figure out how to advertise the task sequence thru script. Even with SDK, im not finding any script examples to advertise a task sequence. Even google doesn't have any worthy search results for my issue.

Can someone help me out, how to advertise a task sequence? or divert me to the right area where such examples are available.

Vijay Murugappa

================

If you wouldn't be forgotten as soon as you are dead, either do something worth writing, or write something worth reading.

Hi,

I've come on to a clients site who had a 3rd party come in and deploy SCCM 2007 for them and did not much of a hand over. I've cleaned up as I can but I have something that has stumped me.

For almost all packages deployed, the packages are installed and work fine, however no status message is every returned\processed by the clients. So the reports always show no Status. I've dug through the client execmgr.log and found the following single line

VerQueryValue failed for ProductName, file C:\Windows\system32\CCM\Cache\MEL000A5.1.S-1-5-21-4078366174-1947741836-1944681223-28565\install-connectorID-Key-5_6_1-winStandard.exe, error 1813

However a few lines later

Execution is complete for program Stratusphere FIT. The exit code is 0, the execution status is Success

In the server I've check the Offer, Mp, and Invproc logs none are showing any errors. The inboxes "look" clean but I'm no experts when it comes to those.

Any suggestions on where to look next?

Cheers

JL

I want a deploy a Office 2013 package and my design is like that ;

1. The package content should be downloaded by all the clients as soon as possible.
2. Users should have option to install this package until the deadline that I set this package for. (If the start installation the content will be already in their local.)
3. At the end of this deadline the package should be installed automatically.

I know this can perform in software update management (patch management) but I want to do this for an (Office 2013 package ) installation script.

Is it possible ?

Hello Experts

I am experiencing hast mismatch when downloading packages from RAP. i have gone through most of forums, blogs but doesn't seems helping it. few packages have issues with few DPs only not even all packages on specific DPs. so i am struggling to understand issue with package or DP. i have done below steps to resolve prob but no luck. 

1. Refresh package on DP, but no luck.

2. Deleted package from DP, waited to update status for an hour. updated source version manually in DB.

update pkgstatus set Status = 2 where id = 'package Id' and sitecode = 'Sitecode' and type = 1
update pkgstatus set SourceVersion = 0 where id = 'packageID' and sitecode = 'Sitecode' and type = 1

re-distributed package on DP.

can someone suggest on this.

Thanks.!

Mandar Murudkar

Hello,

I am running SCCM 2007 R3 and I created my first software package (SCOM 2012 R2 Agent).  I have a simple batch file that checks whether the OS is 32 or 64 bit and determines which .exe to run.  The package gets created and copied down to the clients, but I do not see any progress.  I guess it's because it is using the local System account.  How can I get the package to run under an account that has Administrative rights on the clients?

Hi All

Can i know where i can get sample vb scripts for application packaging. Because each time when i have to use scripts i have to search a lot. Need a script to install exe. Found some samples but they shows some errors. No script i found works perfect.

Thanks

I am trying to install a software via task sequence.  I verified all the permissions are correct and the allow to be installed.... is checked.  The package was working fine in the past but now I am constantly getting the error above.  The other command lines run great before and after the software portion on the TS but the software always fails.  Here is the exemgr log. Can someone offer some insight on what I am missing.

ate="04-22-2014" component="execmgr" context="" type="2" thread="1828" file="executionrequest.cpp:3670">
<![LOG[Execution Request for package XXX00049 program Install state change from NotExist to AdvancedDownload]LOG]!><time="20:20:11.531+000" date="04-22-2014" component="execmgr" context="" type="1" thread="1828" file="executionrequest.cpp:488">
<![LOG[Mandatory execution requested for program Install and advertisement XXX20098]LOG]!><time="20:20:11.531+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5880" file="execreqmgr.cpp:3317">
<![LOG[Creating mandatory request for advert XXX20098, program Install, package XXX00049]LOG]!><time="20:20:11.609+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5880" file="execreqmgr.cpp:3440">
<![LOG[Policy arrived for parent package XXX00049 program Install]LOG]!><time="20:20:11.609+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5932" file="execreqmgr.cpp:6456">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
insXXXce of SoftDistProgramOfferReceivedEvent
{
    AdvertisementId = "XXX20098";
    ClientID = "GUID:409EC206-E3A7-4A35-8461-6409995EB153";
    DateTime = "20140422155011.609000+000";
    MachineName = "XXX-WK-XXX4A069";
    ProcessID = 3348;
    SiteCode = "XXX";
    ThreadID = 5932;
};
]LOG]!><time="20:20:11.609+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5932" file="event.cpp:525">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
insXXXce of SoftDistWaitingContentEvent
{
    AdvertisementId = "XXX20098";
    ClientID = "GUID:409EC206-E3A7-4A35-8461-6409995EB153";
    DateTime = "20140422155011.624000+000";
    MachineName = "XXX-WK-XXX4A069";
    PackageName = "XXX00049";
    PackageVersion = "3";
    ProcessID = 3348;
    ProgramName = "Install";
    SiteCode = "XXX";
    ThreadID = 5880;
};
]LOG]!><time="20:20:11.624+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5880" file="event.cpp:525">
<![LOG[Successfully raised SoftDistWaitingContentEvent event for program Install]LOG]!><time="20:20:11.624+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5880" file="executionrequest.cpp:2623">
<![LOG[Execution Request for package XXX00049 program Install state change from WaitingDependency to WaitingContent]LOG]!><time="20:20:11.624+000" date="04-22-2014" component="execmgr" context="" type="1" thread="5880" file="executionrequest.cpp:488">
<![LOG[Content is available for program Install.]LOG]!><time="20:20:41.655+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionrequest.cpp:4921">
<![LOG[CExecutionRequest::Overriding Service Windows as per policy.]LOG]!><time="20:20:41.655+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionrequest.cpp:3076">
<![LOG[Executing program jre-7u55-windows-i586.exe /s /v "AgreeToLicense=YES IEXPLORER=1 MOZILLA=1 REBOOT=SUPRESS JAVAUPDATE=0 SYSTRAY=0" in Admin context]LOG]!><time="20:20:41.655+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionrequest.cpp:3277">
<![LOG[Execution Request for package XXX00049 program Install state change from WaitingContent to NotifyExecution]LOG]!><time="20:20:41.655+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionrequest.cpp:488">
<![LOG[Execution Manager timer has been fired.]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="4460" file="execreqmgr.cpp:5188">
<![LOG[Checking content location C:\Windows\SysWOW64\CCM\Cache\XXX00049.3.System for use]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executioncontext.cpp:1635">
<![LOG[Successfully selected content location C:\Windows\SysWOW64\CCM\Cache\XXX00049.3.System]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executioncontext.cpp:1703">
<![LOG[Executing program as a script]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionengine.cpp:103">
<![LOG[Successfully prepared command line "C:\Windows\SysWOW64\CCM\Cache\XXX00049.3.System\jre-7u55-windows-i586.exe" /s /v "AgreeToLicense=YES IEXPLORER=1 MOZILLA=1 REBOOT=SUPRESS JAVAUPDATE=0 SYSTRAY=0"]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="scriptexecution.cpp:523">
<![LOG[Command line = "C:\Windows\SysWOW64\CCM\Cache\XXX00049.3.System\jre-7u55-windows-i586.exe" /s /v "AgreeToLicense=YES IEXPLORER=1 MOZILLA=1 REBOOT=SUPRESS JAVAUPDATE=0 SYSTRAY=0", Working Directory = C:\Windows\SysWOW64\CCM\Cache\XXX00049.3.System\]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="scriptexecution.cpp:284">
<![LOG[CreateProcess or CreateProcessAsUser failed to execute command line with non-recoverable error 193]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="3" thread="868" file="scriptexecution.cpp:431">
<![LOG[Raising event:
[SMS_CodePage(437), SMS_LocaleID(1033)]
insXXXce of SoftDistProgramUnableToExecuteEvent
{
    AdvertisementId = "XXX20098";
    ClientID = "GUID:409EC206-E3A7-4A35-8461-6409995EB153";
    CommandLine = "\"C:\\Windows\\SysWOW64\\CCM\\Cache\\XXX00049.3.System\\jre-7u55-windows-i586.exe\" /s /v \"AgreeToLicense=YES IEXPLORER=1 MOZILLA=1 REBOOT=SUPRESS JAVAUPDATE=0 SYSTRAY=0\"";
    DateTime = "20140422155041.671000+000";
    MachineName = "XXX-WK-XXX4A069";
    PackageName = "XXX00049";
    ProcessID = 3348;
    ProgramName = "Install";
    SiteCode = "XXX";
    ThreadID = 868;
    Win32ErrorCode = 2147942593;
    WorkingDirectory = "C:\\Windows\\SysWOW64\\CCM\\Cache\\XXX00049.3.System\\";
};
]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="event.cpp:525">
<![LOG[Raised Program Unable to Execute Event for Ad:XXX20098, Package:XXX00049, Program: Install]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executioncontext.cpp:798">
<![LOG[EnterRsRuningState failed to run script jre-7u55-windows-i586.exe /s /v "AgreeToLicense=YES IEXPLORER=1 MOZILLA=1 REBOOT=SUPRESS JAVAUPDATE=0 SYSTRAY=0" 0x80009101]LOG]!><time="20:20:41.671+000" date="04-22-2014" component="execmgr" context="" type="2" thread="868" file="executionrequest.cpp:3318">
<![LOG[Fatal error 0x80009101 enountered for program Install. This program will not retry.]LOG]!><time="20:20:41.686+000" date="04-22-2014" component="execmgr" context="" type="1" thread="868" file="executionrequest.cpp:3477">

I have created a task sequence to deploy my software as it needs to have c++ and msxml installed first so I created a collection with my test VM and set a advertisement to deploy as soon as possible but nothing is happening.

I have been through the logs on the VM but can't see anything to say that it even hit the VM so was wondering if there was somewhere that I can see on the server why it is not deploying?

Hello,

I have a secondary site in my SCCM 2007 which is not de-cpompressing packages.

the packages are coming down to the 'SMSPKG' folder as .pkg files, but it is not de-compressing into the SMSPKGS$ folder.

I updates one of the smaller packages to re-push the package down and this is what I have seen in the despool.log on the child site

STATMSG: ID=4407 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DESPOOLER" SYS=P-DC-PKF-CMDP01 SITE=PKF PID=2304 TID=1260 GMTDATE=Wed Apr 23 13:58:49.908 2014 ISTR0="PR100155" ISTR1="162" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PR100155" SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
Received package PR100155 version 162 SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
Drive D is not a fixed drive on \\servername, therefore it cannot be used as the compressed package storage direcotry, use the default directory SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
Use drive S for storing the compressed package. SMS_DESPOOLER 23/04/2014 14:58:49 1260 (0x04EC)
Package PR100155 (version 161) exists in the distribution source, save the newer version (version 162). SMS_DESPOOLER 23/04/2014 14:58:50 1260 (0x04EC)
Waiting for ready instruction file.... SMS_DESPOOLER 23/04/2014 14:58:54 2952 (0x0B88)
Stored Package PR100155. Stored Package Version = 162 SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)
Forward package status for pkg PR100155 to site PR1 SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)
STATMSG: ID=4400 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DESPOOLER" SYS=P-DC-PKF-CMDP01 SITE=PKF PID=2304 TID=1260 GMTDATE=Wed Apr 23 13:58:54.978 2014 ISTR0="PR100155" ISTR1="\\servername\S$\SMSPKG\PR100155.PCK" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PR100155" SMS_DESPOOLER 23/04/2014 14:58:54 1260 (0x04EC)

This is happening for all packages on this child site so its not really package related, please could someone provide some insight to what I can do to fix this.

thanks

Nazir

I have a number of InstallShield executables which have answer files generated for deployment via SCCM2007. Unfortunately the deployment doesn't work. It launches the exe then does nothing and eventually times out. Normally I'd finger the .iss file as badly set up, but it applies correctly when the exe is manually launched, including launching with SYSTEM account from the local CCM Cache.

I've tried several variations on the launch the latest being: %~dp0appname\setup /s /a /s /sms /f1"%~dp0appname\setup.iss"

also %~dp0appname\setup /s

%~dp0centerpoint\setup /s /f1"%~dp0centerpoint\setup.iss"

and others from various net articles, but the result is always the same

Does anyone have any idea why this might be happening?