HI Guys,
I am fairly new to SCCM.
I have noticed packages are not getting distributed to one of my DP. I find the below in distmgr.log
Cannot establish connection to ["Display=\\xxxxxxxxxx\"]MSWNET:["SMS_SITE=xxx"]\\xxxxxxxxx\
This is what i have checked till so far.
1] Site server has local Admin right on the DP.
2] All Services are running on Local system and network service where needed.
3] I can access share from DP to Site server and Site server to DP.
Any suggestion would be helpful.
We have SCCM 2007 R2 installed in Central site server and few primary site servers reporting to Central site servers. Recently we did migration of server in one of primary site server. Post this migration, we found issue. when we tried software distribution from Central site server and copied a "package" to all DPs including problematic server DP also. Package status at primary site server showing as "Installed" but showing "INSTALL PENDING" in central site server. This is creating confusion as we are not able to track the exact status. Software distribution is working fine in primary site server(locally). Same issue occurring in Software Update also. It seems "Status Message" not updating. What is the reason behind this? Access issue? or something missing?
Can anyone help on this?
Hello good to all many thanks for sharing your knowledge.
The issue is that I have installed the SCCM 2007 and I would be able to exclude the pc´s of a collection in all the other collections to be able to add them with "Add resource" manually. I've tried with a Query that excludes the collection, but introducing
a pc d that collection by hand let me enter it, I used this sentence:
<<select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.ResourceId not in (Select ResourceID from SMS_FullCollectionMembership where CollectionID="IND00160")>>
If someone could give me a hand, appreciate it.Good,
I'd like to know if there is a Query in SCCM 2007 that would prevent adding a pc in a collection that is excluded to another collection
For now I have this Query to exclude the collection:
<select SMS_R_SYSTEM.ResourceID,SMS_R_SYSTEM.ResourceType,SMS_R_SYSTEM.Name,SMS_R_SYSTEM.SMSUniqueIdentifier,SMS_R_SYSTEM.ResourceDomainORWorkgroup,SMS_R_SYSTEM.Client from SMS_R_System where SMS_R_System.ResourceId not in (select ResourceID from SMS_CM_RES_COLL_xxxx)>
If someone could take a hand, appreciate it.I need to deploy an upgrade for hundreds of machines. A clean install is preferred over a customized package. So the source setup is used without making any changes.It took a considerable amount of time to make the upgrade work.However it works only when the option ' Run with user rights' is selected and with the admin rights provided for that particular account.It fails with the system account. I was able to eventually make it work only with the below conditions
1) Run with user rights in program properties
2) Give Admin rights to the test account
3) If i put XYZ.exe /S in the command line it fails. So i had to put the content inside a folder called X. The data source in the package properties has \\servername\PackageID\Application name. The X folder is in \\servername\PackageID\Application name\X. The command line is X\xyz.exe.
Point 1 and Point 3 are OK. But Point 2 is impossible as it is difficult to do for hundreds of users.
I thought of using ' Run command line ' in the TS. I tried a domain account for 'run this step as the following account'. What should i put in the command line and in 'Start in' ? I am not able to proceed and getting errors. I need to replicate the scenario in the task sequence so that i can take care of all the three points. Is this possible ? Looking forward for the answers from the experts...thanks
Hello all,
For the last 2 weeks I have been fighting ore secondary server that will not download a software updates package. It continues to say "install pending" I keep seeing the same message in the Distmgr.log on the secondary server. I have checked the despoil.log, sender.log and replmgr.log and do not see anything that sticks out as being a error. I have other packages that can be sent to this distribution point without any problems so I know the permissions are ok. I have removed the packaged and added it back a few times and waiting day between removing it and adding it back.
This all started when the drive ran low on space and this was the package that ran the drive out of space. My best clue is in the distmgr.log file I see it says package JFG0001ED requires a newer version (5) and the current version is 4. The problem is the distmgr.log file on the primary server is trying to push version 8 and that is the current version going to the other distribution points. It appears that the secondary server is trying to get an different version than the primary server is serving up.
I have also removed the distribution point role from the secondary server and added it back. I'm pretty sure recreating the package will fix the issue but since it is an update package it is almost 5GB that I would have to resend to 40 other DPs.
~Processing incoming file C:\Program Files (x86)\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\ZMJO6LPC.PKG. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.556 2014 Central Daylight Time><thread=2204 (0x89C)>
~Adding package JFG001ED to the active package array. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>
~Package JFG001ED requires a newer version (5) of source files and the new compressed files haven't arrived yet, current version is 4, skip C:\Program Files (x86)\Microsoft Configuration Manager\inboxes\distmgr.box\INCOMING\ZMJO6LPC.PKG $$<SMS_DISTRIBUTION_MANAGER><Fri
May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>
~Removing package JFG001ED from the active package array. $$<SMS_DISTRIBUTION_MANAGER><Fri May 30 08:43:28.587 2014 Central Daylight Time><thread=2204 (0x89C)>
SCCM 2007 SP2 R3. We do "on-demand" installs by having collections setup targeted with advertisements for various products, say Adobe Acrobat Pro, and when we get a request, we manually drop the client into the collection and the install starts in a few minutes.
Problem is...some staff forget to remove the old clients from the collections.
Can a query be setup to automatically remove the client from the collection post-install, when the collection refreshes? Problem we are seeing is that whether we use a query for HAVING or for NOT HAVING the product, it then brings in all the other computers that don't have the product...
Any way to do this, or, we have to continue to manually remove post-install?
Thanks!
Hi All
I have SCCM 2007 R3 environment consist of 7 primary and multiple secondary sites. All the package are distributed from one Central primary site. From last few day I am not able to distribute packages to DP's come under one Primary site. Distribution on other primary sites are working perfectly. On the problematic primary site all newly and existing packages if updated or refreshed is showing in Install Pending state.
I checked the logs and found couple of entries on problematic site scheduler log which could be the cause of the issue. This is from scheduler.log. Kindly confirm if am correct and way out to sort out the issue.
The CRoutingInst::MakeInstructionFile function failed with SMS error 2.
An error occurred when creating the routing instruction.
Thanks and Regards
Regards Suresh
Hello Experts
i have asked help for similar issue and got solution but this time I am experiencing same issue. i am getting below error in CAS.log ""Hash does not match expected 35BC7C2CC2B2F02ADD0FBBBE9EC70BA06B53EA6A, actual 5725F9DA6AA4BC3E6EE3FE89474483326A492353"". however I observed one thing, the hash values in Central server DB and child server DB are same i.e. 35BC7C2CC2B2F02ADD0FBBBE9EC70BA06B53EA6A. however hashdir.exe returns "" 5725F9DA6AA4BC3E6EE3FE89474483326A492353"". can someone why this difference and where can i find this value.
I used select * from smspackages to find hash values for package.
Thanks..!!
Mandar Murudkar
I want a deploy a Office 2013 package and my design is like that ;
1. The package content should be downloaded by all the clients as soon as possible.
2. Users should have option to install this package until the deadline that I set this package for. (If the start installation the content will be already in their local.)
3. At the end of this deadline the package should be installed automatically.
I know this can perform in software update management (patch management) but I want to do this for an (Office 2013 package ) installation script.
Is it possible ?
Hi
I have several thousand clients failing to install an application via a TS because the software updates component cannot be paused as the screenshot below. I am trying to create a collection based on this to target a VB script to clean up the registry keys and associated TS folders so that I can run the TS against the client again.
What would be the best way to do this and also remediation of the error to allow the TS to install the application?? thanks in advance
many thanks
Can someone help with Query to Create a User Collection with installed specific software.
I have created a collection for Computer Collection with installed specific software but i need to push apps on users and for that i need to create a user collection with specific software installed.
Thanks
Hello i want to deploy 7 microsoft updates in a sequence. my requirement is after the first update is installed and when user reboots his computer second update has to be installed.
how to create a sequence for the updates and deploy them
Hi,
My requirement is to deploy a software whose prerequisites are:
1) A Registry Update
2) Certificate Installation
3) Host Entry
and then software installation
How can i achieve this
Pls help!!!
I am trying to push an wim image to a secondary site and it throws an error saying it cannot decompress the package.
Distmgr.log on the Secondary site says this.....
CTool::ExtractAndDecompressFile failed, error = 4, win32 = 1450, filename = u:\_S Ml6w4.TMP\WIN7_X64_SP1_SCCM_v01E.wim
Cannot decompress package U:\SMSPKG\C01005E3.PCK to u:\_S Ml6w4.TMP, CTool return code = 4
Last failed file is u:\_S Ml6w4.TMP\WIN7_X64_SP1_SCCM_v01E.wim, Win32 error = 1450
Can some one help me in this...
I run SCCM 2012 R2, and use software updates to distribute patches to my Win7 x64 machines.
I want to Internet Explorer 11 thru software updates as well. But I plan to use Enterprise Mode.
In testing this, just deploying IE11 thru software updates does NOT include patch KB2929437, which is what enables Enterprise Mode (despite the date stamp on IE11 in my console showing a date stamp of 5/13/2014 which is later than KB2929437 was released)
Anyway, I don't want a 2 part deployment, first IE11, reboot, then KB2929437.
Is there a better way to handle this - or maybe an updated version of IE11 that just includes the enhancement in the KB?
thanks in advance
Tony
Hi,
I am trying to deploy a HTE IBM package within a Task Sequence with SCCM 2007 on a 64bit Win 7 image. I can deploy the package via an advertisement to a a pc but it does not work when I use it in a Task Sequence. BElow is the errror.
The task sequence execution engine failed executing the action (HTE IBM 64Bit 2) in the group (Install Apps) with the error code 50
Action output: . The operating system reported error 50: The request is not supported.
Any suggestions?
thX
Wave~Chaser
Hello all,
I am on an SCCM assignement to deploy few applications. Now I've been asked to test those apps if they are able to be silently installed on Windows 7 client(s). Most of them are .exe files / apps.
Can anyone please help me out with this? How can I test this?
Thanks in advance! :)
I am have a simple batch file removing two reg entries. It runs fine as a package and IF its the only thing in the TS. If I place any step after it or place it anywhere else in the TS it fails. I even added a simple reboot as the next step and oddly the reg files are still there. Makes no sence to me.
I am not a sccm guru or a script person and pull most of my stuff from work others have done. I included the batch file below. I do not know what the first few lines do but if I rem them out it does not work, and the only way I could get it to terminate was to exit 0 which is fine when it works properly.
I am open to any fix or suggested course of action John Michael
reg query hklm\software\classes\installer\products /f "java(tm) 7" /s | find "HKEY_LOCAL_MACHINE" > deljava.txt
for /f "tokens=* delims= " %%a in (deljava.txt) do reg delete %%a /f
del deljava.txt
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\wow6432node\JavaSoft\Java Runtime Environment" /f
reg delete "HKEY_LOCAL_MACHINE\SOFTWARE\JavaSoft\Java Runtime Environment" /f
exit 0
Hello,
Since a couple of day we are experiencing software download issue (hangs).
I had a look on the IIS logs on the DP's and found a lot of 402.1 errors
10.248.10.15 GET /SMS_DP_SMSPKG$/6fc3dcab-3fc2-4fac-8a72-e0e33c0a2b34/sccm /windowsxp-kb2957503-x86-custom-enu.exe 80 - 179.1.74.39 Microsoft+BITS/6.7 401 2 5 1509 0
10.248.10.15 GET /SMS_DP_SMSPKG$/6fc3dcab-3fc2-4fac-8a72-e0e33c0a2b34/sccm /windowsxp-kb2957503-x86-custom-enu.exe 80 MSNET\PCNAME$ 179.1.74.39 Microsoft+BITS/6.7 206 0 0 67130
They are always two lines. One with the ip only and 401.2 error and a second line with Computername and ip and code 206
Any idea of what is happening ?
Regards,
Michel